Yodave Products
  • Online Orders
  • Contact Us
  • Kit Installation Instructions
  • The 457 Trigger
We're making the switch to Canadian Funds at the checkout, we will still be shipping worldwide via airmail from Canada, delivery times are still floating right around 2 weeks, thanks for choosing Yodave
1 Inch target stickers in sheets of 18 stickers

1 inch self adhesive target stickers, turn any piece of paper or cardboard into a target with a solid aim point. Sold in sheets of 18 stickers

C$
0.60    
CZ 457 Spring

Reduce the trigger pull to half of what the factory spring will adjust down to, used in conjunction with the sear adjustment screw located on the front of the trigger blade you can now get your trigger pull safely down to under 1 pound, or of course adjust it back up to the 2.5 pound range. Included with the spring is a support block to aid in removing the trigger pivot pin. I light dab of grease will hold the spring in place while you reinstall the trigger blade into the trigger housing.

C$
19.00    
CZ 457 Plus 10% Striker Spring

Upgrade your worn or weak striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. All benchrest and long range shooters will tell you that success starts with good consistent ignition.

C$
16.50    
CZ 452, 455, BRNO 2,4, and 5 kit
This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new springs plus a 3/32 roll pin to replace the original front trigger pin. Trigger pull weight can be adjusted from approx. 1 to 3.5 pounds. Individual results may very.
C$
23.50    
 
3/32 Pin Punch
3/32 inch pin punch for removing and replacing factory trigger pins while installing the above trigger kit, the punch will be packaged in with the components of the trigger kit.
C$
13.00    
CZ Bolt Disassembly Tool

Our own designed bolt buddy for disassembling and reassembling your CZ/BRNO bolt for cleaning and or maintenance, so simple to use you"ll wonder how you ever got this far without one in your range bag, priced per piece

C$15.50 C$12.25
CZ 452, 453, 455, and 513 Striker Spring
Upgade your worn or weak striker spring with this new 10 percent heavier striking spring for a more consistant primer strike and ignition. All benchrest shooters will tell you that success starts with good consistant ignition.
C$
16.75    
 
BRNO 1, 2, 3, 4, 5, and SAA 2500 Striker Spring

Upgrade your worn or weak striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. All benchrest shooters will tell you that success starts with good consistent ignition.

C$
16.75    
 
CZ 557 Spring

Reduce the trigger pull to half of what the factory spring will adjust down to, used in conjunction with the sear adjustment screw located on the front of the trigger blade you can now get your trigger pull safely down to under 1 pound, or of course adjust it back up to the 2.5 pound range. Included with the spring is a support block to aid in removing the trigger pivot pin. A light dab of grease will hold the spring in place while you reinstall the trigger blade into the trigger housing.

C$
19.50    
10 Pack Snap Caps

YoDave snap caps are precisely molded from resilient polymer for many safe, damage free firing pin strikes, can also be used for function testing and firearms training. The polymer is slightly softer then the others on the market and the rim does not shatter after a couple strong hits from the firing pin, sold in a package of 10

C$
8.50    
Digital Rim thickness gauge

fast and simple tool for sorting your ammo by rim thickness, the aluminum body can be used with the supplied dial gauge or can be removed and used on a Vernier caliper. Sorting ammo in one or all 3 methods of sorting can eliminate some of those nasty fliers that spoil our shooting experience

C$
110.00    
34mm Anti Cant Scope Level

34mm Anti Cant Scope Level, fits scope with main tube of 34mm, sight glass is offset so you can easily track the level without having to shift out of your shooting position

C$
33.00    
30mm Anti Cant Scope Level

30mm Anti Cant scope level, fits scope with main tube of 30mm, sight glass is off set so you can easily track the level without having to shift out of your shooting position

C$
33.75    
1 inch Anti Cant Scope Level
1 Inch Anti Cant Scope Level fits all scopes with a 1 Inch main tube​, sight glass is off set so you can easily track the level without having to shift out of your shooting position
C$
33.75    
 
Dovetail anti-cant rifle level

Anti- cant rifle level thatworks on both 3/8 and 11mm dovetails

C$
28.50    
Weaver style rifle level

Anti-cant rifle level that attaches to all weaver and picatinny scope rails

C$
28.50    
Tikka Long Action Bolt stop

Custom CNC machined Tikka long action Bolt stop, uses factory spring and retainer pin. For those that want to chase the lands in a factory chamber utilizing a long action magazine in a short action chambering, takes only minutes to install.

C$
45.00    
Tikka Short action bolt stop

Custom CNC machined Tikka short action Bolt stop, uses factory spring and retainer pin.

C$
45.00    
Barrel Heat Thermometer

Self adhesive thermometer sticker you can attach anywhere on your barrel to monitor heat build up during either load development or string shooting, help prevent serious damage to your barrel with this awesome visual aid, also handy in knowing when your barrel has cooled down enough to start shooting again.

C$
6.50    
Tikka T3, T3X and T1X spring

Replacing the factory trigger spring with this new spring can yield you a nice crisp trigger pull of less then one pound, unleash the true potential of your Tikka rifle with a lighter target trigger pull, results have averaged 12 ounce pull with the adjustment screw turned all the way out on the tension screw, easy installation. Also fits Sako 75 and 85 models as well as the 595 and 695 models which utilize the same trigger mechanism

C$
13.00    
 
Sako Quad 85/75 A7 spring
Replacing the factory trigger spring with this new spring can yield you a nice
crisp trigger pull of less then one pound, unleash the true potential of your 
 Sako rifle with a lighter target trigger pull, results have averaged 12 ounce
pull with the adjustment screw turned all the way out on the tension screw, easy
installation.
C$
13.00    
 
Rifle Cleaning Cradle

Collapsible cleaning cradle that works just as hard at the range as it does at home on the workbench

C$
45.00    
Tikka T1X .22 cal Bore Guide

Tikka T1X 22 cal delron bore guide made by Dewey Products, protect your trigger assembly from cleaning solvents and your chamber from a misaligned cleaning rod.

C$
29.00    
Tikka T1X 17 caliber Bore Guide

Tikka T1X 17 cal delron bore guide made by Dewey Products, protect your trigger assembly from cleaning solvents and your chamber from a misaligned cleaning rod.

C$
29.00    
Rimfire Chamber Flag/Bolt Open Indicator

bright yellow rimfireflags to prove your firearm is safe and unloaded when on or behind the firing line, more ranges are mandating the use of them. (sold as singles)

C$
5.75    
Large Bolt Open/Chamber flag

bright yellow chamber flags to prove your firearm is safe and unloaded when on or behind the firing line, more ranges are mandating the use of them ( sold as single units)

C$
5.75    
Shooting Bags
these bags are unfilled and will need to be filled with either sand or rice before you can use them. Front and Rear bag included
C$
32.50    
Jumbo shooting bag
Jumbo cradle shooting bag, will come unfilled and pressed flat, can be filled with sand, air soft pellets or rice.
C$
41.50    
CZ/BRNO 22 bore guides

CZ/BRNO 22 cal delron bore guide made by Dewey Products fits both CZ and Brno rifles chambered in .22

C$
29.50    
 
CZ 17 cal bore guides

CZ 17 cal delron bore guides made by Dewey Products

C$
29.50    
 
3/4 inch cut square cleaning patches
Dewey 3/4 inch pre-shrunk cotton flannel patches, made oversized for real cleaning power and packed in reclosable zip-lock bags, 250/bag
C$
5.25    
 
Ruger American Spring

Replace the factory ruger trigger spring with our reduced pull spring and shave up to 40% off your trigger pull weight, not every trigger is the same so we can't guarantee that yours will be 40% lighter over factory, but rest assured, it will be lighter

C$
13.00    
Marlin Finger lever plunger reduced power spring

no more fighting to click the lever into the fire position on those Marlin Model 1894, 1895, 336 and 444 models, polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced power spring will result in a very smooth operating lever throw

C$
13.00    
Marlin Straight body design reduced power hammer spring

reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is going to provide quicker follow up shots while maintaining a steady aim on your target, and less finger fatigue after a long day on the range. Fit's Marlin Models 39a, 1894, 1895, 336 and 444 models

C$
17.00    
A bolt, A Bolt 2 spring

Browning A bolt trigger spring, reduce the factory trigger pull by up to 50% with the install of of our new Browning trigger spring kit. Spring fits both the A Bolt and the A Bolt 2

C$
13.00    
A Bolt 3 Spring

Browning A bolt 3 trigger spring, reduce the factory trigger pull by up to 50% with the install of of our new Browning trigger spring kit. This is a pre-buy opportunity and they will ship as soon as available so expect a slight delay in delivery of your order

C$
13.00    
X Bolt Spring

Browning X bolt trigger spring, reduce the factory trigger pull by up to 50% with the install of of our new Browning trigger spring kit, in stock and ready to ship

C$
13.00    
7 piece cleaning kit

assortment of nylon and bronze brushes and plastic dental picks for cleaning hard to reach areas without the risk of damage to the metal or surfaces

C$
9.75    
Dovetail to Weaver adapters

.22 to Weaver

2-piece mount


Made from lightweight aircraft aluminum


Satin black finish


3/8" dovetail (.22) to standard dovetail (Weaver)

C$
18.00    
Yodave Vinyl decal

4 inch outdoor grade vinyl decal showcasing Yodave Products, let the world know that you've got good taste

C$
3.50    
Silhouette decal

4 inch outdoor grade vinyl decal of the 4 silhouette animals, will last for years displayed where ever you chose to place it

C$
3.50    
Group Therapy shirt small
Good group therapy always makes me happy T-shirt, graphics are printed on the back of the shirt 
C$
28.00    
 
Picture
Good group therapy vinyl decal

4 inchoutdoor grade vinyl decal with good group therapy always makes me happy, will last for years displayed where ever you'd like to have it shown off

C$
3.50    
Picture
Group Therapy shirt medium
C$
28.00    
Group Therapy shirt large
C$
28.00    
Group Therapy shirt Xtra large
C$
28.00    

                         Check back often for new products and specials